On Saturday 28. new Slovenian science fiction convention was held in Ljubljana for the first time. I was pleasantly surprised over the participation, as there was, most of the time, present at least 100 people.
Convention hall.
Different science fiction, board game, roleplaying related societies presented their activities. There were a sections dedicated to playing Magic the Gathering, Warhammer and painting Warhammer figures. Of course, event like this needs cosplaying performance. Award for the best costume was won by the Witch King (LotR – Lord of the Nazgul), followed by Morgana (LoL champion) costume with moving wings. As befits sci-fi event we even saw Princess Leila slave costume.
Witch King versus Demon Huntress, playing Warhammer.Magic section.
During the convention, there were lectures with various topics. Artistic society presented the process of making their Witch King costume. From ideas and design to their actual implementation. There was a discussion about problems of translating personal names in books and maintaining their relevance to the content.
My Nikon DSLR camera does not have any internal programmable mode for continuous shooting (intervalometer) or socket in which wired remote shutter could be plugged in. The only way you can make exposures longer than 30 second is using IR remote. If you want to take only a few pictures, this is not a problem. But when you want to make a time lapse few hours long or photograph a meteor shower for whole night, this is no longer convenient. Especially when you want exposures to have the same length and the same interval between them, this can be very challenging.
That is why I took one of those cheap IR remotes and upgraded it using small ATtiny85 microcontroller. Its task is to simulate button presses depending on the settings of the DIP switch. The element in use consists of five switches. The first one (1) is used for selecting the operation mode. When switched ON continuous mode is selected and long exposure mode when it is turned OFF. Other four switches (5-2) determine the length of exposure or interval. You can change the settings during exposition, but they are not taken into account until the next exposition.
Front panel with ATtiny, DIP switch, MOS N-FET and power plug
Long exposure options – DIP switch 1 is set to OFF:
DIP switch 2 ⇒ 10 min
DIP switch 3 ⇒ 5 min
DIP switch 4 ⇒ 2 min
DIP switch 5 ⇒ 1 min
Total maximum time for a long exposure, when all switches are turned ON, is 18 minutes.
Continuous shooting (intervalometer) mode options – DIP switch 1 is set to ON:
DIP switch 2 ⇒ 120 s
DIP switch 3 ⇒ 60 s
DIP switch 4 ⇒ 30 s
DIP switch 5 ⇒ 10 s
Total maximum interval between two exposures in continuous shooting mode, when all switches are turned ON, is 240 seconds.
Back panel with voltage regulator and original IR remote
Button presses are simulated using MOS N-FET 2N7000 transistor (see the bottom image for wiring diagram). When pin 1 goes to HIGH the transistor opens and concludes an electric circuit that provides power to IR remote circuit.