Cooling Basler camera

To examine the effect of heating up a Basler acA640-100gm on image dark current noise during imaging, I conducted an experiment where I took multiple longer (~2 min) films (conditions: dark room, cap on, constant ambient temperature) with different frame exposure lengths and observed mean image pixel value at the beginning and end of the test. Frame exposure lengths and film durations are approximately equal to the ones used in planetary imaging with this camera and not suitable for DSO imaging.

Image exposure length With cooler – mean pixel value Without cooler – mean pixel value
At the beginning of the test 10 ms 17.8 17.5
50 ms 18.1 18.3
500 ms 26.7 26.0
1000 ms = 1 s 44.7 40.1
In the end of the test, after ~2 min when the casing temperature was constant 10 ms 18.1 18.5
50 ms 18.7 19.4
500 ms 32.5 42.4
1000 ms = 1 s 60.6 96.1
Basler camera with attached DIY aluminium cooler (without any fan), salvaged from an older CPU.

The following graphs show, the change of camera casing temperature over time in comparison to the constant ambient temperature. From the plots it is observable that majority of heat up occurs in the first 30 sec of imaging and remains almost constant after that.

Working temperature plot with attached cooler.

Working temperature plot without attached cooler.